Cast Steel Flanged Gate Valve

The cast steel flanged gate valve is engineered for on/off isolation in demanding pipeline systems where reliable shutoff and minimal pressure drop are critical. Designed and manufactured in accordance with API 600, ASME B16.34 and API 598, this metal-seated (hard-seated) gate valve features a robust cast steel body, bolted bonnet, OS&Y rising stem and Stellite-faced seating surfaces — delivering long service life under high pressure, high temperature and abrasive media conditions. Unlike soft-seated valves limited by temperature and erosion, the hard metal-to-metal seal of our cast steel flanged gate valve ensures stable performance from −29 °C to +540 °C, making it the preferred choice for oil & gas, petrochemical, power generation, steam systems and refinery applications.
Send Inquiry
Description

The cast steel flanged gate valve is engineered for on/off isolation in demanding pipeline systems where reliable shutoff and minimal pressure drop are critical. Designed and manufactured in accordance with API 600, ASME B16.34 and API 598, this metal-seated (hard-seated) gate valve features a robust cast steel body, bolted bonnet, OS&Y rising stem and Stellite-faced seating surfaces - delivering long service life under high pressure, high temperature and abrasive media conditions.

Unlike soft-seated valves limited by temperature and erosion, the hard metal-to-metal seal of our cast steel flanged gate valve ensures stable performance from −29 °C to +540 °C, making it the preferred choice for oil & gas, petrochemical, power generation, steam systems and refinery applications.

 

Key Product Highlights

 

1:True Metal-to-Metal Hard Sealing Seats and wedge are precision-ground and hard-faced with Stellite No.6 alloy (HRC ≥ 38), resistant to erosion, galling and thermal deformation. Ideal for steam, crude oil, slurry and high-cycle service where soft seats would fail.

2:Full-Bore Design, Minimal Pressure Drop The straight-through full port design provides unobstructed flow with near-zero pressure loss when fully open - reducing pumping energy and eliminating cavitation risk in mainline isolation.

3:Pressure-Seal Bonnet for High-Class Ratings For Class 900 and above, the pressure-seal bonnet design uses internal line pressure to increase sealing force - the higher the pressure, the tighter the seal. Proven in power plant main steam and boiler feedwater lines.

4.Integral Backseat & Anti-Blowout Stem The backseat allows safe repacking under pressure without shutting down the line. The anti-blowout stem design meets API 600 safety requirements and protects personnel during operation.

5:Wide Material & Configuration Flexibility From carbon steel WCB to low-temperature LCB and corrosion-resistant CF8M/duplex stainless steel, plus options for bypass valves, drain plugs, extended stems (buried/cryogenic service) and gear or electric actuators - one platform, fully customizable.

6:Every Valve Tested, Fully Traceable Each cast steel flanged gate valve is individually tested per API 598 and marked with a unique serial number linked to material heat number, NDT records and test reports. EN 10204 3.1 MTCs are supplied with every shipment. Third-party inspection by TUV, SGS, BV or Lloyd's is fully supported.

 

Detailed Technical Specifications

 

Parameter

Technical Specification

Design Standard

API 600 / ASME B16.34 / BS 1414

Face to Face

ASME B16.10 (Standard & Short Pattern)

Flange End

ASME B16.5 (Class 150–600) / ASME B16.47 Series A & B (Class 900–2500), RF / RTJ

Size Range

2" – 48" (DN50 – DN1200)

Pressure Class

Class 150 / 300 / 600 / 900 / 1500 / 2500 (PN10 – PN420)

Body Material

WCB (A216), WC6, WC9, LCB (low temp), CF8/CF8M (stainless), Duplex 2205/2507

Trim / Wedge

Flexible wedge or solid wedge; 13Cr / F6a; Stellite No.6 hard-faced seat & wedge

Stem

Rising stem, OS&Y, integral backseat, anti-blowout design

Bonnet

Bolted bonnet (Class 150–600); pressure seal bonnet (Class 900 and above)

Seat Leakage

Metal seated: ANSI/FCI 70-2 Class IV (standard)

Temperature Range

−29 °C ~ +425 °C (WCB); up to +540 °C (WC6/WC9); −46 °C (LCB)

Operation

Handwheel / gear operator / electric actuator / bevel gear (Class 900+ standard)

Testing & Inspection

API 598 / ISO 5208: shell test 1.5×, high-pressure seat test 1.1×, low-pressure air seat test

NDT

RT / UT / MT / PT per ASTM A216 & customer requirement

Certificates

ISO 9001, API 6D, EN 10204 3.1 MTC, PED 2014/68/EU (CE), ATEX actuator optional

Coating

Sandblasting Sa2.5 + epoxy primer / customer-specified paint system

product-800-800

Target Industries

 

1:Oil & gas transmission pipelines, wellhead isolation, manifold systems

2:Refinery process lines: crude, vacuum residue, coking units

3:Power plants: main steam, reheat steam, boiler feedwater, blowdown

4:Petrochemical: high-temperature hydrocarbon, catalyst lines

5:Steam distribution networks, district heating, desalination

6:Slurry and abrasive media services (hardened trim recommended)

one-stop solution

professional team

high quality

 

Who We Work With

 

product-750-1131

 

FAQ

 

Q1: What is your Minimum Order Quantity (MOQ)?

A:We support a low MOQ starting from just 1 pieces, making it highly suitable for new brands, small-batch testing, and trial orders.

Q2: What is the difference between a soft-seated and a cast steel flanged gate valve?

A:soft-seated gate valve uses PTFE/rubber seats and is limited to lower temperatures (typically ≤ 200 °C). The cast steel flanged gate valve uses a metal-to-metal hard seal (Stellite-faced), which handles temperatures up to 540 °C, resists erosion and abrasion, and suits steam, crude oil and slurry services - though it trades off zero-leakage tightness at low differential pressure.

Q3: Can you supply this valve for sour service (H₂S)?

A:Yes. For NACE MR0175 / MR0103 sour service, we supply materials with controlled hardness (body/wedge ≤ 22 HRC), qualified WPS/PQR and SSC-resistant trim. Please specify H₂S partial pressure and pH.

Q4: What leakage class can metal-seated gate valves achieve?

A:Standard metal-seated construction achieves ANSI/FCI 70-2 Class IV. If your process requires tighter shutoff, we can offer lapped seating surfaces with special machining or recommend a double-disc / parallel-slide design.

Q5: Do you offer OEM/custom designs and private labeling?

A:Yes. We accept custom face-to-face dimensions, special materials, extended stems, bypass arrangements, nameplate branding and packaging. Drawings are available for approval before production.

Hot Tags: cast steel flanged gate valve, China cast steel flanged gate valve manufacturers, factory

Send Inquiry

Send Inquiry